SPLIT SET® friction rock stabilizers
INTERNATIONAL ROLLFORMS, INC.

Home | Rock Bolts | Mining and Ground Support Applications | Contact Us

Split Set® Friction Rock Stabilizers - Rock Bolts for Reliable Ground Support Split Set® friction rock stabilizers are manufactured by International Rollforms, Inc. for underground or above ground applications in mines, tunnels, slopes, or wherever reliable ground support is needed. Our friction rock bolts produce superior holding power due to their unique design that exerts pressure against the rock over its full contact length immediately upon installation. When ground shift occurs, our rock bolts conform to the changing ground conditions. The result is a tight grip that actually grows stronger with time and ground movements, providing reliable ground support. It never needs tightening.

Our friction rock stabilizers are a simple system requiring only 2 parts, a tube and bearing plate. Fast, easy installation takes usually less than a minute - just drill and drive. Split Set® stabilizers come in 3 models. They are available in lengths and sizes to meet your needs and are made of standard, galvanized, or stainless steel.

Download specifications in pdf format for:
Model SS-33 is 1.3 inches (33 mm) in diameter.
Model SS-39 is 1.5 inches (39 mm) in diameter.
Model SS-46 is 1.8 inches (46 mm) in diameter.

(Requires 'Adobe Acrobat Reader' version 4.0 or higher to view.)

Download Adobe Acrobat for Free!

Our rock stabilization system has a patented "Ring Indexing" feature for determining the length of the installed Split Set®.

    Advantages of Using the Split Set® Friction Rock Stabilizer System
  • Fast, easy installation . reduces bolting costs
  • Yieldable support
  • Immediate support
  • Maintains support even if bearing plate is knocked off
  • Proved by millions of installations
  • No mixing, no pressurizing
  • Visual inspection
  • Maintains plate pressure
  • No special equipment needed
  • No torquing or retorquing
  • Loads rock in compression
  • Grip increases with rock shifts
  • Active axial and radial support
  • Minimal stress concentration
  • Simple design
  • Plain, galvanized or stainless steel
  • Effective at any angle
  • Won.t overstress hole
  • Technical assistance by experienced personnel
  • Easier mesh installation
  • One worldwide standard of quality
  • No shelf life limits
Our friction rock stabilization system will save you money on labor, materials and maintenance.


SPLIT SET® Products

International Rollforms, Inc.

P.O. Box 5426
Deptford, NJ 08096
Phone: 1.888.561.4200
Fax: 1.856.401.8583



Home | Rock Bolts | Mining and Ground Support Applications | Privacy Statement | Contact Us

International Rollforms, Inc. / Splitset
All rights reserved.